AFI DeLuxe Dual Trumpet Electric Horn by AFI

AFI DeLuxe Dual Trumpet Electric Horn

Features

Horn motors and compressors are 12 Volt,unless otherwise indicated

Totally sealed sound unit

Stainless steel cover, diaphragm, and mounting bracket

122 decibel blast

ABYC approved for vessels up to 12 meters long

Dimensions: 18 1/2'' L x 8'' W x 4 3/4'' H

AFI is the leading supplier of horns to the marine industry, with over 50 years of experience.

AFI horns are designed specifically for marine use.

AFI offers a complete line of marine horn products designed to meet almost any need, including electric and air trumpet horns, compact horns, electric and air below deck horns, and a comprehensive line of drop-in horns with a wide assortment of grill options.

Stainless steel is used for all critical components such as: trumpets, motor covers, diaphragms and assembly and mounting hardware.

AFI horns are set at a lower frequency to provide greater range across water.

Horns are easy to install with pre-wiring or quick-connect tabs.

Vibration-dampening mounting pads are included with all deck horns.

All horns feature sealed sound units with non-corrosive diaphragms.

AFI electric horns meet the American Boat andYacht Council (ABYC) Regulation #A-23 for boats

RELATIVE LOUDNESS - up to 12 meters.

All AFI air horns meet U.S. Coast Guard?sC.O.L.R.E.G.S. and U.S. Inland Navigation Rules,Annex II Regulations for boats up to 20 meters.

AFI horns are listed in the National MarineManufacturers Association (NMMA) CertificationProgram "type accepted" list. All AFI horns are listed for boats up to 12 meters and all AFI air horns are listed for boats up to 20 meters.

NOTE: Horns should be mounted facing forward whenever possible. The NMMA CertificationProgram requires this for boats 26' or longer.

Notice Concerning Marine Horns, CE, andElectromagnetic InterferenceIn order to operate, an electric horn rapidly makes and breaks an electric circuit. This operation creates electromagnetic disturbance, which may cause electrical "noise" in communications equipment. Because a horn is only used temporarily ,any interference in electronic equipment is stopped when the horn is turned off.

The International Marine Certification Institute (IMCI), which certifies boats to the European Community Regulations (CE),has determined that boats using electric horns can comply withCE requirements on electromagnetic compatibility provided the above message is given to the boat owners in their manual.AFI Horn Relative Loudness Comparison Chart

This horn is built to last! The sound unit is totally sealed against weather and spray. The cover, diaphragm, and mounting bracket are all made from tough, Type 304 stainless steel. Loud, 122 decibel blast. Low frequency carries long distances over water. 1 year warranty. All AFI electric horns are American Boat And Yacht Council (ABYC) approved for vessels up to 12 meters long. Dimensions: 18 1/2'' L x 4'' W x 4 3/4'' H.

Available from Boatersworld
Price: $149.99
Updated on 5-31-2008.